Products
SKC "UNC" THREAD CARBON STEEL (SKS) 3-PC HAND TAP SETS 803
- S89-4
Description:
UNC THREAD
TAPER
8 to 10 threads chamfered for easy thread starting in rough materials.
PLUG
3 to 5 threads chamfered - general use when tapping to bottom of holes is not critical. (This is the most widely used type of tap.)
BOTTOMING
1-1/2 threads chamfered - use after threads have been started for tapping to bottom of hole.
Packing :
3/32" - 3/4" -- 10 sets/box
7/8" - 2" -- 1 set/box
P204 Share
| ITEM NO. | Size x UNC Thread per Inch | Quantity |
|---|---|---|
| 089-04-006 | 3/32" x 48 | |
| 089-04-008 | 1/8" x 40 | |
| 089-04-010 | 5/32" x 32 | |
| 089-04-012 | 3/16" x 24 | |
| 089-04-016 | 1/4" x 20 | |
| 089-04-020 | 5/16" x 18 | |
| 089-04-024 | 3/8" x 16 | |
| 089-04-028 | 7/16" x 14 | |
| 089-04-032 | 1/2" x 13 | |
| 089-04-036 | 9/16" x 12 | |
| 089-04-040 | 5/8" x 11 | |
| 089-04-044 | 11/16" x 11 | |
| 089-04-048 | 3/4" x 10 | |
| 089-04-056 | 7/8" x 9 | |
| 089-04-100 | 1" x 8 | |
| 089-04-108 | 1-1/8" x 7 | |
| 089-04-116 | 1-1/4" x 7 | |
| 089-04-124 | 1-3/8" x 6 | |
| 089-04-132 | 1-1/2" x 6 | |
| 089-04-148 | 1-3/4" x 5 | |
| 089-04-156 | 1-7/8" x 4-1/2 | |
| 089-04-200 | 2" x 4-1/2 |