CORE BITS & HOLE SAWS
MARS VACUUM BRAZED DIAMOND CORE BIT FOR MARBLE AND GRANITE
- S58-4-M
Description:
The standard speed for "MARS" VHS Vacuum brazed diamond core drill for drilling marble and porcelain is 2000-25000 r.p.m., it should be used with water. To prevent wear and tear, it is advisable to drill one hole within one
minute, if drilling several holes within one minute, it will bring high temperature and causes the diamond to be wear off easily.
Hex shank
Size 5 ~ 14mm without centre drill
Size 16 ~ 115mm with centre drill
P153 Share
| ITEM NO. | DIAMETER (MM) | HEX SHANK (MM) | FLUTE LGTH (MM) | Quantity |
|---|---|---|---|---|
| 058-04-M005 | 5 w/o centre drill | 8.3 | 50 | |
| 058-04-M006 | 6 w/o centre drill | 8.3 | 50 | |
| 058-04-M008 | 8 w/o centre drill | 8.3 | 50 | |
| 058-04-M010 | 10 w/o centre drill | 8.3 | 50 | |
| 058-04-M012 | 12 w/o centre drill | 8.3 | 50 | |
| 058-04-M013 | 13 w/o centre drill | 8.3 | 50 | |
| 058-04-M014 | 14 w/o centre drill | 8.3 | 50 | |
| 058-04-M016 | 16 | 11 | 50 | |
| 058-04-M018 | 18 | 11 | 50 | |
| 058-04-M019 | 19 | 11 | 50 | |
| 058-04-M020 | 20 | 11 | 50 | |
| 058-04-M022 | 22 | 11 | 50 | |
| 058-04-M024 | 24 | 11 | 50 | |
| 058-04-M025 | 25 | 11 | 50 | |
| 058-04-M026 | 26 | 11 | 50 | |
| 058-04-M028 | 28 | 11 | 50 | |
| 058-04-M030 | 30 | 11 | 50 | |
| 058-04-M032 | 32 | 11 | 50 | |
| 058-04-M035 | 35 | 11 | 50 | |
| 058-04-M038 | 38 | 11 | 50 | |
| 058-04-M040 | 40 | 11 | 50 | |
| 058-04-M045 | 45 | 11 | 50 | |
| 058-04-M050 | 50 | 11 | 50 | |
| 058-04-M055 | 55 | 11 | 50 | |
| 058-04-M060 | 60 | 11 | 50 | |
| 058-04-M065 | 65 | 11 | 50 | |
| 058-04-M070 | 70 | 11 | 50 | |
| 058-04-M075 | 75 | 11 | 50 | |
| 058-04-M080 | 80 | 11 | 50 | |
| 058-04-M090 | 90 | 11 | 50 | |
| 058-04-M100 | 100 | 11 | 50 | |
| 058-04-M115 | 115 | 11 | 50 | |
| 058-04-PD | Pilot Drill Bit |
