IMCO CARBIDE BURRS - CYLINDER SHAPE END CUT (SB)

0
0

BURRS

IMCO CARBIDE BURRS - CYLINDER SHAPE END CUT (SB)

  • S98-2-SB
Description:

image-3

 

BURR SELECTION GUIDE

image-1

Standard cut: This style has only right-hand spiral flutes, producing good stock removal and excellent surface finishes. Use this cut for general deburring in cast iron, steel, copper alloys, brass alloys and other ferrous materials.

image-2

Double cut:  Right- and left-hand flutes combine to produce a chiseltype cutting edge. You get faster penetration and stock removal, and better control and less operator fatigue due to reduced pull.

image-4

image-5

 

image-6

P275
Share
ITEM NO. MODEL NO. CODE NO. d2 Shank Dia.(mm) d1 Cutter Dia.(mm) l2 Cutter Lgth(MM) l1 Overall Lgth(mm) Quantity
098-02-303SB Standard Cut SB-43M 60123 3 3 14 38
098-02-3063SB Standard Cut SB-51M 60129 3 6.3 12.7 50
098-02-606SB Standard Cut SB-1M 60130 6 6 19 50
098-02-608SB Standard Cut SB-2M 60131 6 8 19 63
098-02-6095SB Standard Cut SB-3M 60132 6 9.5 19 63
098-02-6127SB Standard Cut SB-5M 60134 6 12.7 25 69
098-02-616SB Standard Cut SB-6M 60135 6 16 25 69
098-02-D303SB Double Cut SB-43M 60142 3 3 14 38
098-02-D3063SB Double Cut SB-51M 60148 3 6.3 12.7 50
098-02-D606SB Double Cut SB-1M 60149 6 6 19 50
098-02-D608SB Double Cut SB-2M 60150 6 8 19 63
098-02-D6095SB Double Cut SB-3M 60151 6 9.5 19 63
098-02-D6127SB Double Cut SB-5M 60153 6 12.7 25 69
098-02-D616SB Double Cut SB-6M 60154 6 16 25 69